Spontaneous Oleofoams from Water-in-Oil Emulsions

Spontaneously foaming oil systems have been formulated from water-in-oil emulsions by the controlled release and entrapment of gas in emulsified water droplets contained within the oil. The cascade of events leading to their formation is as follows: Two Span 60-emulsified populations of water droplets, one containing Na₂CO₃, the other 10% HCl and caseinate, were mixed in miglyol oil; the controlled coalescence of Na₂CO₃ droplets with the HCl ones served as a microreactor for the pH reduction and the subsequent release of CO₂ from Na₂CO₃; these gas microbubbles were arrested by sodium caseinate, stabilizing a microfoam within the water droplets; these droplets expanded under the rising gas pressure, spontaneously transforming the surrounding oil into a foamy oleogel containing water droplets.     

Effect of water aging on the mechanical properties of flax fiber/bio-based resin composites

Present work investigates the effect of hydrothermal aging of flax fiber-reinforced bio-based epoxy resin laminates on the mechanical and thermomechanical properties of the composites. Three different types of bio-based resins were used. Plates reinforced with eight layers plain weave flax fibers of 150 g/m², manufactured using Resin Transfer Molding (RTM), compression molding or autoclave technique depends on type of the resin. One dimensional Fickian behavior shows a good fitting to the experimental data derived from weight measurements. The water uptake at the equilibrium state in the case of 60 °C temperature was slightly greater than that at 40 °C. The mechanical properties after hydrothermal aging show a significant reduction and do not return to their initial values even after the drying process. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48787.     

Interlayer bonding between thermoplastic composites and metals by in-situ polymerization technique

Fiber-metal laminates (FMLs) offer the superior characteristics of polymer composites (i.e., light weight, high strength and stiffness) with the ductility and fracture strength of metals. The bond strength between the two dissimilar materials, composite and metal, dictates the properties and performance of the FMLs. The bonding becomes more critical when the polymer matrix is thermoplastic and hydrophobic in nature. This work employed a novel bonding technique between thermoplastic composites and a metal layer using six different combinations of organic coatings. The flexural, and interlaminar shear strength of the thermoplastic fiber metal laminates (TP-FMLs) were examined to investigate the bond strengths in the different cases along with fracture characteristics revealed from the tested samples using scanning electron microscopy. The viscoelastic performance of the fabricated TP-FMLs were also investigated using the dynamic mechanical thermal analysis method.     

Evaluation of polyesters from renewable resources as alternatives to the current fossil-based polymers. Phase transitions of poly(butylene 2,5-furan-dicarboxylate)

Poly(butylene 2,5-furan dicarboxylate) (PBF) is an alipharomatic polyester that can be prepared using monomers derived from renewable resources such as 2,5-furan dicarboxylic acid and 1,4-butanediol. In the present work the thermal behavior of PBF was studied. Multiple melting was observed during heating traces of samples isothermally crystallized from the melt using differential scanning calorimetry (DSC). The wide angle X-ray diffraction (WAXD) patterns did not reveal the presence of a second crystal population, or a crystal transition upon heating. DSC study showed that the phenomena are closely related to recrystallization. Temperature modulated DSC (TMDSC) tests indeed evidenced enhanced recrystallization. The equilibrium melting point was estimated to be 184.5 °C using the linear Hoffman–Weeks extrapolation. The heat of fusion of the pure crystalline polymer was found equal to 129 J/g or (27.35 kJ/mol), a little lower than that of PBT. The Lauritzen–Hoffman secondary nucleation theory was used and the surface energy values and the work of chain folding were found to be comparable to those of PBT, but quite lower than those of poly(ethylene terephthalate) (PET). The non-isothermal crystallization on cooling and the cold-crystallization of quenched samples were also studied. Condensed spherulites were observed on isothermal crystallization under large supercoolings by using polarized optical microscopy (POM), while the spherulites turned to ring-banded morphology at higher temperatures. In every case the nucleation density was high.     

Clinical Evaluation of Extracellular ADMA Concentrations in Human Blood and Adipose Tissue

Circulating asymmetrical dimethylarginine (ADMA), an endogenous inhibitor of nitric oxide synthesis, has been proposed as a biomarker for clinical outcome. Dimethylarginine dimethylaminohydrolase (DDAH) is the main enzyme responsible for ADMA metabolism and elimination. Adipose tissue ADMA concentrations and DDAH activity and their role in diabetes and obesity have not yet been investigated. In this study, we evaluated clinical microdialysis in combination with a sensitive analytical method (GC-MS/MS) to measure ADMA concentrations in extracellular fluid. Adipose tissue ADMA concentrations were assessed before and during an oral glucose tolerance test in lean healthy subjects and subjects with diabetes (n = 4 each), and in morbidly obese subjects before and after weight loss of 30 kg (n = 7). DDAH activity was determined in subcutaneous and visceral adipose tissue obtained during laparoscopic surgery (n = 5 paired samples). Mean interstitial ADMA concentrations did not differ between study populations (healthy 0.17 ± 0.03 μM; diabetic 0.21 ± 0.03 μM; morbidly obese 0.16 ± 0.01 and 0.17 ± 0.01 μM before and after weight loss, respectively). We did not observe any response of interstitial ADMA concentrations to the oral glucose challenge. Adipose tissue DDAH activity was negligible compared to liver tissue. Thus, adipose tissue ADMA plays a minor role in NO-dependent regulation of adipose tissue blood flow and metabolism.     

Concepts of Wildland Fire Protection of Cultural Monuments and National Parks in Greece. Case Study: Digital Telemetry Networks at the Forest of Ancient Olympia

The concepts and particularities of fire protection planning for monuments of cultural heritage that are surrounded by national parks and other public wildlands are outlined, in the context of the general wildland fire problem of Greece. Typical examples of cultural monuments that were threatened by wildland fires in Greece are reported. A conceptual flowchart that combines optimal fire protection objectives with the protected values and functions of the national parks and cultural monuments is analyzed. A case-study presents the development of an electronic forest fire protection support system in the forest around the Ancient Olympia site in Greece, as an example of the potential deployment of innovative technologies in wildland fire protection. The aim of the system is twofold. First, the system supports remote monitoring of an extensive hydraulic network of pipelines, pumps and water-storage tanks build in the vicinity of the site. Second, the system provides means for remote operation of numerous revolving water-jets installed on top of heavy-duty tree-high metal towers, spread at key-locations inside the surrounding forest. All system telemetry data and command signals are transmitted through a single underground wire link requiring no external electric power at sensor/actuator locations inside the forest. Special user interfaces allow immediate system deployment either from a central graphics-based console screen or from purpose-build remote consoles installed at selected locations in the forest, thus achieving a high degree of readiness.     

Growth patterns of the eight regions in the People's Republic of China (1980–1985)

The objective of this brief paper is very specific: to test with data from the People's Republic of China (PRC) an earlier model by the author on regional relative dynamics. Originally, that model was used to replicate the regional relative population and income growth of Nine Divisions in the United States for the period 1929–1979.Only one component of the original model is replicated in the case of the PRC, due to data limitations. Although the full regional dynamics model contains a system of two simultaneous differential equations, with a linear and a non-linear isocline respectively, here only the equation with the linear isocline is confirmed. This particular component of the model has also been independently verified for the case of Japan's regional growth.The author wishes to acknowledge the valuable contribution of Jian Zhang, his research assistant, for collecting and processing the data. Comments from T.R. Lakshmanan and two anonymous referees are also acknowledged, which helped improve the exposition of the paper's material     

Environmentally Friendly Determination of Quality Parameters of Biodiesel/Diesel Blends Using Fourier Transform Infrared Spectra

Multivariate calibration models based on data from mid‐infrared spectroscopy of biodiesel/diesel blends were obtained. The blends were prepared from diesel oil and esters of soybean oil, waste cooking oil, and hydrogenated vegetable oil in proportions ranging from 0 to 100 % biodiesel. The results showed that the multivariate regression models with interval partial least squares (iPLS), backward interval partial least squares (biPLS), and synergy interval partial least squares (siPLS) were able to determine the fractions of the infrared spectrum that contain the relevant information for estimating the values of physicochemical properties, flash point, specific gravity, and cetane number, which are used in quality control of the blends. In the best models, the values of determination coefficients were greater than 0.9500, proving their efficiency as an alternative to traditional analytical methods.     

Smart Surfaces: Heterogeneous Photo-Catalysis on TiO2 Based Coatings for De-pollution Purposes in Indoor and Outdoor Environments

Topics in Catalysis - Heterogeneous photocatalysis using semiconductors, e.g. TiO2 as photocatalyst is a promising technology for the degradation of environmental pollutants. Preliminary evidence...